|
iBOX:Online DATALOGGER with
embedded webserver
For eg Process, Machine, Meteo and Energy monitoring
MONITORING SOLUTIONS
for a wide range of APPLICATIONS:
- WIND, WEATHER & METEOROLOGY
- RENEWABLE ENERGY (WIND, SOLAR ENERGY)
- NATURE, ENVIRONMENT, TRAFFIC, SAFETY & HEALTH
- TECHNOLOGY, PROCESS, MACHINES & ENERGY MANAGEMENT
- SPECIAL PROJECTS
ACCORDING YOUR SPECIFICATIONS
with
ONLINE OPTIONS:
- Graphs & Web
Displays (Graphic or Alphanumeric)
- Data automatically to EKO-iCLOUD or to your own Server
- Smartphone & Tablet Compatible (Android/iPhone/Windows Phone)
- Control Functions for Remote Switching & Alarms
Wind speed in Eindhoven using iBOX
>
iP enabled dataloger with SD card
for recording data (up
to 2GByte)
> LAN/Ethernet/WiFi interface/Internet connection
> Receive current values and datafiles (via FTP at your
server or via browser online
Data)
> View current values using the embedded webserver
and receive alarms via email
> Remote wireless internet
connection via GPRS/UMTS/HSDPA/3G
(via wireless 3G router)
> Wireless remote datalogger networks possible (local WiFi,
remote via GPRS/3G)
>
Standard versions or customised systems available
>
NEW: LOW COST
Windlogger with iBOX 595 euro ex VAT
The iBOX has
an
embedded WEBSERVER for operation, reading
values & setup
and for
control
of switches via Ethernet or Internet, by
simply using
your browser.
Moreover the
intelligent (single/duo/multichannel) iBOX system can measure and log
(e.g. analog)
values of sensors/signals (1 up to 32 input signals and 5 outputs),
send the values (datafiles) via Ethernet/Internet to a server.
See also:
-
Web enabled remote switch
-
stand alone datalogger EKO21N
-
wind speed /meteo/ renewable energy datalogger
-
iP sensor and transducers
*
pdf datasheet
*
Excel
pricelist
*
Software /hardware manual |
iBOX Communication
options (using
the
embedded webserver)
- LOCAL : to PC (using a cross Ethernet cable)
- LAN: via Local area network
- WLAN via Wifi module (optional)
- WAN (Wide Area Network) remote wired connection
over the internet using port forwarding at the remote router
- WWAN (Wireless Wide Area Network) using GPRS/3G router
- Optional ONLINE
Data
/Graphs/
WEB-display
- See
application note
for
remote sensor/ datalogger
networks (wired and wireless)
-
New:
Ultra low power version
(<100uA) for remote/mobile
applications with wireless GPRS/3G router (low power WWAN) |
OPTIONAL:
Email alarms, alarm outputs (max 2), control switches (max3) via internet
using the
(password protected) embedded webserver, see
online demo
Two way
communication is possible, also possible remote via internet:
> Read values, status and adjust logger parameters via embedded
webserver
of iBOX
> Receive datafiles automatically at server from remote iBOX
iBOX <->
Ethernet connection <Router> Internet Connection (wired/wireless) <->
PC/Server
The iBOX can also be connected to internet via
wireless GPRS/UMTS/HSPDA/3G router: WWAN
Advantages of using a wireless GPRS/UMTS/HSDPA/3G Router:
> A remote or mobile connection is possible (if no local network is
available)
> Ethernet connection can -if desired- be completely
separated from the main network
Note: If sim card with fixed iP address is used the
embedded webserver is available via internet
>
Configured & Ready for Use for
Your Specific Application: see standard configurations below
special design with excellent high-tech workmanshipis posssible, RoHS and CE certified
New: ultra low
power version with optional wireless GPRS/3G router for remote
applications
>
Webserver & Display
Use your TABLET as display!
Your PC, laptop, smartphone or TABLET, iPAD as "super
display" via
Ethernet/Internet/WLAN/WiFi for:
reading values & status and setup logger-parameters via
embedded webserver
Possible to access the webserver remote over the internet for
reading values and setup
also wireless via GPRS/HSDPA/3G router (WWAN) for remote
applications
Optional online
WEB-display
/
online graphs
Webserver as super
display and for setup and control
> Inputs options for any sensor(s) or signal(s)
up to max 32 inputs e.g.:
-
analog signals (0-5/10 V , 0/4...20 mA)
- status signals (on/off, high/low)
- counter (for eg
kWh or rain, 12 or 24 bits cumulative counter, non volatile)
- event
- special inputs/outputs
- operate remote on/off switches via your browser (up to 3
remote switches 230V /6A)
-
alarm outputs (switch/email)
Can be connected ditectly
to a lot of sensors, like:
> temperature sensor(s)
> pressure sensor
> wind speed
> wind direction
> solar radiation
> uv radiation
> rain
> energy (power or kWh
analog or via pulscounter)
> humidity
> frequency
> level
> etc. see also
products
See also
pricelist and example :
iP anemometer.
EKOPOWER
provides also tailor-made on-line monitoring systems for specialised
purposes
> ONLINE options
receive
data
at server and view online
online graphs
/webdisplay
> Highly accurate
12
or 16 bits resolution
> Low Cost
contact us via email
|
